Specifications

RA7x/SA7x Pocket Reference Guide 67
F2—Soft Servo Fault
Error Description: The DSP firmware has detected
an error.
FN: 4A—svo.grd.bnd.—soft servo fault or inner or
outer guard band
Most Probable Cause: ECM, HDA
FD—DSP Reset Failure
Error Description: The DSP is in the reset state
and the signal HOLDA L is asserted, or the DSP is in
the DMA/HOLD state and the signal HOLDA L is not
asserted.
FN: 81—ast.hld.ack.—asserted hold acknowledge from
DSP processor
FN: 82—inv.dma.num.—invalid DMA space number
FN: 83—neg.hld.ack.—negated hold acknowledge
from DSP processor
Most Probable Cause: ECM
FF—Debug Error Trap
Error Description: This error code is reserved for
engineering to test and debug the drive internal
firmware operations. Normally this error will not show
up in the field.
FN: FF—failed.test.—general failed test
Most Probable Cause: ECM