Specifications

64 RA7x/SA7x Pocket Reference Guide
E9—Firmware Detected Fault - DSP Handler
Error Description: The I/O processor firmware has
detected an inconsistency in the DSP handler. This
handler controls and monitors the servo functions via
the driver.
FN: 90—inc.dst.grp.—incorrect destination group
(head) number
FN: 91—inv.dsp.lsn.—invalid DSP logical state number
FN: 92—exp.dsp.tmr.—expired DSP state timer
FN: 93—inc.dsp.psn.—incorrect DSP physical state
number
FN: 94—inc.dsp.rsp.—incorrect DSP response opcode
FN: 95—inc.dsp.lsn.—incorrect DSP logical state
number
FN: 96—inv.svo.head—invalid servo head number
FN: 97—exp.dtn.tmr.—expired detent state timer
FN: 98—inc.dtn.psn.—incorrect detent physical state
number
FN: 99—inv.svo.cyl.—invalid servo cylinder number
FN: 9A—exp.rtz.tmr.—expired return to zero state
timer
FN: 9B—inc.rtz.psn.—incorrect return to zero physical
state number
FN: 9C—inc.rtz.cyl.—incorrect return to zero cylinder
number
FN: 9D—exp.sek.tmr.—expired seek state timer
FN: 9E—inc.sek.psn.—incorrect seek physical state
number
FN: 9F—inc.sek.cyl.—incorrect seek cylinder number
Most Probable Cause: ECM, HDA
EA—Firmware Detected Fault - SDI Driver
Error Description: The I/O processor firmware has
detected an inconsistency in the SDI driver. This
driver provides the interface to the controller and the
read/write hardware via the SDI gate array.
FN: A6—aut.snd.flt.—auto send mode fault
FN: A7—inv.rsp.byct.—invalid response packet byte
count
FN: AA—drv.not.rwr.—drive NOT read/write ready
FN: AF—inc.sct.num.—incorrect/invalid sector number
Most Probable Cause: ECM