Specifications

58 RA7x/SA7x Pocket Reference Guide
E1—Firmware Detected Fault - Test Handler
Error Description: The I/O processor firmware
has detected an inconsistency in the test handler
(TSTHDR). The TSTHDR controls the drive when and
only when it is connected to the test device at the
manufacturing plant or a repair center.
FN: 10—inv.tsts.adr.—invalid test memory address
number
FN: 11—exp.tst.tmr.—expired test command received
timer
FN: 12—inv.tst.byct.—invalid test command packet
byte count
FN: 13—inv.tst.opcd.—invalid test command packet
opcode
FN: 14—inv.rdm.ofst.—invalid read memory address
offset
FN: 15—inv.rdm.byct.—invalid read memory data
count
FN: 16—inv.wrm.ofst.—invalid write memory address
offset
FN: 17—inv.wrm.byct.—invalid write memory data
count
FN: 18—inv.wrm.data.—invalid write memory data
(RAM didn’t change)
FN: 19—inv.exc.ofst.—invalid execute memory address
offset
FN: 1A—inv.exc.byct.—invalid execute memory data
count
FN: 1B—emp.exc.buf.—empty execute command
buffer (no arguments)
FN: 1C—ful.exc.buf.—full execute response buffer
FN: 1D—inv.fnc.num.—invalid SWI "trap" function
number
FN: 1E—tst.und.flt.—tsthdr module undefined fault
FN: 1F—tst.und.flt.—tsthdr module undefined fault
Most Probable Cause: ECM