Installation guide

4.2 Single-Host Installation of an SF3xx Storage Array
Figure 4–4 Magazine Tape Subsystem Power Cords and Voltage Selection
SHR-X0141B-90-CPG
DSSI
CONNECTORS
AC RECEPTACLE
AC POWER
SWITCH
4.2.2 Cabling the Storage Array (Single-Host)
Start at the rear of the SF3xx storage array cabinet.
1. Plug the main power cable of the storage array into its power receptacle.
WARNING
Hazardous voltages are contained in the storage array and in the
components of the storage array.
When performing any operation involving the power source, turn off
the power controls of all components and on the power controller.
Installing an SF3xx Storage Array to a VAX 6000 System 4–7