Installation guide

D.2 DSSI VAXcluster Installation of an DECarray
Table D–3 SF7x DSSI ID Verification (Front View)
ALL Positions
1
MSCP
Switch
Settings
Corresponding
DSSI ID Number
Left Rear (LR)
Left Front (LF)
Right Front (RF)
Right Rear (RR)
0
0
0
0
001
010
011
100
1
2
3
4
1
The switch settings for OCPs in these positions are 0 = down and 1 = up.
Make sure that the DSSI ID numbers of each TF857 magazine tape ISE
installed in the array are set to 0 and that the TMSCP switch is enabled
(down). Refer to the TF857 magazine tape ISE documentation for the
procedure to access the DSSI adapter module.
Installing a DECarray with VAX 4000 Systems D–15