Installation guide

C.2 Conversion Procedure

You can also refer to the inside cover of the SF Family Label Booklet

(part number 36–32882–01) for instructions on how to ﬁll out these

labels.

C.2.4.2 Filling Out the Labels

There are two sizes of colored labels: the larger one for the DSSI cables,

and the smaller one for the inside of the Sx72 OCP door, the front panel of a

magazine tape subsystem, and the host system I/O panel.

Refer to the inside cover of the SF Family Label Booklet (part number 36–

32882–01) for instructions on what information to put on each of the two types

of labels.

For the dual-host conﬁguration, use the following colored labels on the Sx72

OCP doors, the front panels of the magazine tape subsystems, and all DSSI

cables.

Converting a Single-Host Conﬁguration to a Dual-Host Conﬁguration C–13