Installation guide

A.1 General Cabling Rules
Table A–3 Stripeset Configuration
Device LEFT RIGHT TOP BOTTOM
SF1 P01 P07 N/A N/A
SF2 P02 P08 N/A N/A
SF3 P03 P09 N/A N/A
SF4 P04 P10 N/A N/A
SF5 P05 P11 N/A N/A
SF6 P06 P12 N/A N/A
TF1 N/A N/A P06 Term
TF2 N/A N/A P05 Term
TF3 N/A N/A P04 Term
TF4 N/A N/A P03 Term
Explanation
Left—Left DSSI connector on SFx storage enclosure)
Right—Right DSSI connector on SFx Storage enclosure)
TOP—TOP DSSI connector on TFx Storage enclosure)
Bottom—Bottom DSSI connector on TFx Storage enclosure)
P0x—DSSI port x of the I/O panel
SF2–L—Left DSSI connector of the SF2 Storage enclosure)
Term—Terminator
The cabling for dual-host and stripeset is very similar. In case a tape loader
subsystem and SFx Storage enclosures are mounted, the SFx and the TFx will
not be connected to each other.
A–4 SF300 DSSI Storage Array Cabling Diagrams