Installation guide

8.1 Troubleshooting the SF7x Storage Enclosure
Figure 8–2 SF7x Front Cover Removal
SHR-X0126A-90
Write
Protect
Fault
DSSI
ID
Write
Protect
Ready Fault
DSSI
ID
d
i g i
t
a l
Ready
OPERATOR CONTROL PANEL (OCP)
FRONT COVER
CAPTIVE SCREWS
DRIVE DC POWER SWITCHES
ENCLOSURE
CAPTIVE SCREWS
FRONT COVER
DOOR
b. Loosen the wedges on the disk ISE.
c. Disconnect all cables to the disk ISE as shown in Figure 8–3.
d. Remove the Rx7x disk ISE as shown in Figure 8–4. Slide out the disk
ISE gently, while holding all cables out of the way. Do not force the
disk ISE.
8–6 Installation Troubleshooting