Installation guide

5.2 Cabling the SF7x in Storage Array Position
Figure 5–14 Installing the 42-Inch DSSI Cable (Position 1)
230
115
FAULTFAULTFAULT
1
0
SHR-X0127A-90
DSSI
CONNECTORS
POWER SUPPLY
FAULT INDICATOR
(BEHIND PANEL)
AC RECEPTACLE AC POWER
SWITCH
LINE VOLTAGE
SELECTOR SWITCH
(BEHIND PANEL)
a magazine tape subsystem is installed (TF2) of the Sx300 storage
array.
The following steps are for cabling SF2 without a magazine tape subsystem
TF2:
1. At the rear of the storage array, locate the DSSI I/O panel at the bottom.
5–32 Installing the SF7x Storage Enclosure in an Sx300 Storage Array