User guide

The Bit-100 v2 has its own fully integrated patch memory & recall system, a much enhanced version of what
is available on the original Bit One.
Click on the white button labelled ’Program ‘ in order to select a program. Note that if you make
alterations to a par ticular program, those alterations will remain in effect if you select a different
program , but will not be present if you launch the Bit-100 v2 on another occasion. Copying programs
from one memory slot to another can be achieved by clicking on the menu labelled File . This
menu also includes options for saving & loading either individual programs (patches) or the
entire bank, as discrete files on your hard drive.
Midi Channel : select a midi input channel - please ensure that this matches the settings in your host .
Program display : displays the currently selected program .
Value display : displays the value of the current or last adjusted parameter setting.
There are no facilities on the Bit-100 v2 to layer two patches together or split the keyboard
between two patches. However, you can achieve these configurations by launching 2 instances
of the Bit-100 v2 in your host progra m and controlling them from the host program .
Audition:
Use this to check that the Bit-100 v2 is correctly set up within your host software . If pressing
keys does not yield a sound but the Test Tone can be heard, then the chances are that the
Bit-100 v2 ͛s midi input is not configured correctly. The test tone emits a pitch of middle C ʹ you
can thus check that the Bit-100 v2 tuning is correct. The status of this button saves with the program.
Program menus :
18 Control Panel
Unison:
When set, the instrument becomes a duophonic synthesizer with 3 voices stacked on each note.