User Manual

Industrial Motherboards
Features
AIMB-707
LGA1200 10th Generation Intel
®
Core™
i9/i7/i5/i3 & Pentium
®
/Celeron
®
ATX
with DVI/VGA, DDR4, USB 3.2, M.2,
6 COMs
 Intel
®
10th generation Core™ i9/i7/i5/i3 & Pentium
®
/Celeron
®
processor
with H420E chipset
 Dual channel (Non-ECC) DDR4 2400/2666/2933 up to 64 GB
 Support VGA and DVI display
 M.2, SATA 3.0, USB 3.2, dual GbEs
 5 RS-232 and 1 RS-232/422/485 serial ports
 1 PCIe x16 (Gen 3) and 2 PCIe x4 (x1 Gen 3 link), and 4 PCI expansion slots
Note: Legacy platform is not supported.
Specifications
Processor System
CPU i9-10900K i9-10900E i9-10900TE i7-10700E i7-10700TE i5-10500E i5-10500TE i3-10100E i3-10100TE G6400E G6400TE G5900E G5900TE
Base Frequency 3.7 GHz 2.8 GHz 1.8 GHz 2.9 GHz 2.0 GHz 3.1 GHz 2.3 GHz 3.2 GHz 2.3 GHz 3.8 GHz 3.2 GHz 3.2 GHz 3.0 GHz
L3 Cache 20 MB 20 MB 20 MB 16 MB 16 MB 12 MB 12 MB 6 MB 6 MB 4 MB 4 MB 2 MB 2 MB
Cores 10 10 10 8 8 6 6 4 4 2 2 2 2
TDP 125W 65 W 35 W 65 W 35 W 65 W 35 W 65 W 35 W 65 W 35 W 65 W 35 W
Socket LGA1200
Chipset Intel H420E
BIOS AMI 128Mbit SPI Flash
Expansion Slot
PCI 4 (32-bit/33 MHz)
PCIe x4 (Gen 3) 2 (link x1)
PCIe x16 (Gen 3) 1
Memory
Technology Dual Channel(Non-ECC) DDR4 2400/2666/2933
Max Capacity 64 GB
Sockets 2 x 288-pin DIMM
Graphics
Controller Chipset integrated Intel HD Graphics
VRAM Shared system memory is subject to OS
Ethernet
Interface 10/100/1000 Mbps
Controller GbE LAN1: Intel I219-V, GbE LAN2: Intel I211-AT
Connector 2 x RJ-45
SATA
Max Data Transfer Rate 600 MB/s
Channel 4
Rear I/O
VGA 1 (Resolution up to 1920 x 1200 @ 60 Hz)
DVI 1 for G2 version (Resolution up to 1920 x 1200 @ 60 Hz)
Ethernet 2 for G2 version; 1 for VG version
USB 6 (USB 3.2 Gen 1 for G2 version; 4 for VG version)
Audio 2 (Line-out, Mic-in)
Serial 2 (RS-232)
Internal Connectors
USB 4 (2 x USB 2.0 via header, 2 x USB 2.0 Type-A) for G2 version; 3 (2 x USB 2.0 via header, 1 x USB 2.0 Type-A) for VG version
Serial 4 for G2 version (3 x RS-232, box-header; 1 x RS-232/422/485 with auto-flow control, box-header)
SATA 4
M.2 1 for G2 version (PCIe x2 M-key 2280 type)
GPIO 8-bit
Watchdog Timer
Output System reset
Interval Programmable 1 - 255 sec
Power Requirement
Test Environment Intel Core i9-10900E; DDR4 32 GB x 2
Voltage 3.3V 5V 12V 5Vsb -12V
Current 0.72A 1.29A 6.5A 0.11A 0.04A
Environment
Operating Non-Operating
Temperature 0 ~ 60 °C (32 ~ 140 °F), depends on CPU speed and system thermal solution -40 ~ 85 °C (-40 ~ 185 °F)
Humidity 40 °C @ 95% RH Non-condensing 60 °C @ 95% RH Non-condensing
Physical Characteristics Dimensions (L x H) 304.8 x 244 mm (12" x 9.6")
Note: A 8-pin 12V CPU power plug connected to MB's CPU 12V connector is required to support i9-10900K CPU.
DDR4 2400/2666/2933 SATA 3.0
RS-232/422/485
USB Type-A
PCI
2 RS-232 Audio
USB 3.2 Gen 1 PCIe x16
PCIe x4 (x1 link)
RS-232
Intel H420E PCH USB 2.0
Intel LGA1200
Core i9/i7/i5/i3
M.2
VGA
DVI-D
LAN
USB 3.2 Gen 1
All product specifications are subject to change without notice. Last updated: 18-Aug-2021