OWNER'S MANUAL MANTIS RS360 ENCLOSURE FOR INSTA360 ONE RS 1-Inch 360 Edition Please read these instructions carefully before using this product, and save this manual for future use. The latest version can be found on https://www.mantis-sub.com/support/. For questions, email info@mantis-sub.com or visit https://www.mantis-sub.com/. Please note that the actual controls and components, menu items, etc.
Table of Contents CAUTIONS FOR USE...............................................................................................4 WARRANTY AND LIMITATIONS OF LIABILITY....................................................5 PACKAGE LIST........................................................................................................5 FEATURES................................................................................................................5 SPECIFICATIONS....................................
ABOUT THE MANTIS RS360 ENCLOSURE The Insta360 ONE RS 1-inch 360 Edition raises the bar for 360 video and photography quality. With the RS360 housing you can now take it as deep as 250m / 820ft underwater. Enjoy effortless stitching, battery-saving one-button control for underwater on/off, and a M6x1 bulkhead port. TOP ADVANTAGES OF THE MANTIS RS360 HOUSING Utilises increased low-light capability and dynamic range of the large dual 1inch sensors (about 2 stops better than Pro 2).
CAUTIONS FOR USE A water-tight test in a bathtub or similar is highly recommended when using the system for the first time and after the changing of port and O-ring(s). Submerge the enclosure fully for several minutes, and watch for any bubbles. Before cleaning the enclosure, remove the camera. Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc, to clean the enclosure, since it may deteriorate the external case or the coating may peel off.
WARRANTY AND LIMITATIONS OF LIABILITY For warranty, limitations of liability and terms of sale see our standard terms at https://www.mantis-sub.com/ PACKAGE LIST 1x Soft camera bag 1x Mantis RS360 underwater enclosure with o 2x domes, mounted. o 1x M14 Port plug, installed. o 2x Sacrificial anodes, installed. 1x 2.5mm hex key for domes. 1x O-ring kit. 1x O-ring grease. 1x Neoprene bag for underwater enclosure. 1x USB-C port plug.
PREPARING THE INSTA360 ONE RS 1-INCH 360 EDITION FOR USE The Mantis RS360 housing is designed for the Insta360 ONE RS 1-inch Edition without the mounting bracket. This is so that the domes can be mounted closer to the lenses for better stitching. To remove the Insta360 ONE RS 1-inch Edition from the mounting bracket follow these steps: 1. Open the charge port cover. 2. Push the retaining clips on both sides of the mounting bracket to release the camera assembly. 3.
RECOMMENDED CAMERA SETTINGS FOR INSTA360 ONE RS Recording mode (swipe right from left edge) Recording mode: Video Video mode (tap on bottom edge) Video mode: 6K 2:1/30 Configuration settings (swipe down from top edge) Quick capture: On Indicator light: On Sharpness: Low Brightness: Low Voice control: Off Automatic screen rotation: On WiFi: Auto On/Off Screen auto sleep during recording: On Recording settings (swipe left from right edge) Color: Standard Shutter: Auto (1
CAMERA IN RS360 HOUSING 8 All rights reserved. Information and specifications may change at any time without notice. Version 1.
PRE-DIVE CHECKLIST 1. Confirm the Insta360 ONE RS is charged and properly seated 2. Confirm the USB-C port plug is installed on the camera’s charge port. Note: The port plug is designed to prevent damage to the battery electronics from water that may drop into the housing when it is opened. If the port plug is damaged or lost we recommend covering the charge port with electrical tape. 3. Confirm the O-ring is in place, undamaged, and free of debris. 4.
CARE AND MAINTENANCE 1. Soak the enclosure in fresh water after each salt water use, during which all control buttons/knobs should be operated a few times to avoid the accumulation of salt residue; wipe the enclosure with a towel before opening. 1. After each day of diving, it is advisable to have the main O-ring in the front part of the enclosure removed from its groove and inspected for damage.
RECOMMENDED MEMORY CARDS 1. The Insta360 ONE RS 1-inch 360 Edition records about 1 GB per minute in 6K mode, and the battery lasts for about 60 minutes. We recommend a 128GB card. 2. Please use exFAT Format MicroSD cards of speed classes UHS-I and V30. 3. Please do not use UHS-II, UHS-III Micro SD/TF cards or memory cards larger than 1TB. These cards are not compatible with ONE RS and may cause your recording to fail. 4. The maximum supported storage space of the Insta360 ONE RS is 1TB. 5.
TRADEMARKS Insta360 and ONE RS are trademarks or registered trademarks of Shenzhen ARASHI VISION INC.in the United States and/or other countries. All product names, logos, brands, trademarks and registered trademarks are property of their respective owners. All company, product and service names used in this manual are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement. 1 All rights reserved.
CONTACT Global Dive Limited 52 Remuera Road Auckland, 1050 New Zealand Web: https://www.mantis-sub.com/ Email: info@mantis-sub.com Tel: +64 (0) 9 920 5200 1 All rights reserved. Information and specifications may change at any time without notice. Version 1.
