Service manual

u Remove all three screws on the inside of the turret.
Note: the front screw has a washer.
u Remove the old turret and replace with the new turret.
u Replace all three screws.
Note: do not over tighten.
u Reinstall the head to the stand.
u Reinstall the objective lenses.
u Verify that the new turret rotates smoothly.
Mantis Service Manual www.visioneng.com/support
MAINTENANCE & SPARE PARTS
8
Jean Louis MENEGON - Votre représentant et Conseiller
tél
: 06 76 08 96 83
Email: [e-mail] - web: www.menegon-metrologie.com