Specifications

30259-0-0212Page 48
Economy Mode (Red Button Operation)
Toutilizethisfeature,aprogrammablecontrolorthermostatmust
beconnectedtothereplace.Aredbuttonislocatednexttothe
burnerswitchesonthefrontcontrolpanel.SeeFigure75.Thisis
calledtheeconomymode.
FRONT
BURNER
SWITCH
REAR
BURNER
SWITCH
ECONOMY
DISPLAY
BUTTON
= OFF
=ON
Figure 75
Tousethisfeature,bothburnerswitchesneedtobeinthe“ON”
position,andtheredbuttonmustbepressedsoitisilluminated.
This will ignite the front burner. The front burner will remain on
whentheredbuttonisilluminated,andthebackburnerwillcycle
withthethermostat.Theredbuttonactsonlyasanoverrideforthe
frontburner.
To Deactivate
Presstheredbuttonsoitisnotilluminated,thenthereplacewill
returntonormaloperation.
Battery Operated Controls
Thisunitisequippedwithafactoryinstalledwirelessremote.
AllRemoteControlsareallbatteryoperateddevices.
Optional Battery Operated Control
FRBTP BatteryOperatedRemotewithProgrammableTher-
mostat
TRW BatteryOperatedWirelessRemoteWallThermostat
Note: These optional controls will work with the factory
installed receiver. No wiring is required.
CAUTION
Before connecting any controller, disconnect power
to the replace.
REMOTE
CONTROL
RECEIVER
14 WAY RIBBON TO
CONTROL MODULE
P1
T1
T2
P2
BLUE
TRANSFORMER
RED
BLACK
Figure 76
Adjusttheremotefromtheinstructionsprovidedwiththeremote
control.
Note: If the replace will not be used for long periods of time,
turn the burner switches to the “OFF” position and turn the
power off at the power source.
OPTIONAL CONTROLS