Specifications
30259-0-0212 Page 37
START UP CHECK LIST
1. Verify the gas line service does not exceed 10.5 in. w.c.
and is not below 5.0 in. w.c. for natural gas, nor exceeds
13.0in.w.c.orisbelow11.0in.w.c.forLPgas.
2. Checkand inspect the replace for gas leaks.In the event
ofgasleaks,cutoffthegassupplytothereplaceimmedi-
atelyandcallyourgassupplier.Verifythegaslinehasbeen
purged.
3. Verifythatallexhaustandinletairpipesareunobstructedand
properlyjoined.
4. Visually verify the burners are free of dust and debris.
SeeFigures56and67.
5. Check and verify that logs are place correctly. See pages
33to35.Thelogsmustbeinthecorrectpositionorthere-
placewillnotoperatecorrectly.
DO NOT light replace without the logs installed, the replace
will not operate properly.
6. Verifythatallpanelsaresecuredinplaceandthattheglass
assemblydoorhasbeenlockedinposition.
7. VerifythetwoburnerswitchesareintheOFFpositionbefore
applyingpowerandthemainpowerswitch.
8. Afterverifyingandcheckingalltheabovepoints,proceedto
lighting instructions. Refer to Page 38.
9. Verifythatthepolarityoftheconnectionsarecorrectandthe
linevoltagepowerleadsaresecure.
Note:Ifusingasurround,verifyitisinstalledpertheinstruc-
tionsincludedwiththekit.
WARNING
BEFORE OPERATING THIS Fireplace, CARE-
FULLY READ THE FOLLOWING.