Specifications

30259-0-0212Page 36
WIRING
This replace is equipped with a three-prong [grounding]
plug for your protection against shock hazard and should be
plugged directly into a properly grounded three-prong recep-
tacle. Do not cut or remove the grounding prong from this
plug.Foranungroundedreceptacle, anadapter,whichhastwo
prongsandawireforgrounding,canbepurchased.
Proper line voltage polarity must be maintained in order for the
controlsystemtooperatecorrectly.Verifytheincomingneutralline
isconnectedtothewhitewireandtheincoming“hot”lineiscon-
nected to the blackwire. The replace willnot operate properly
unlessthepolarityandgroundarecorrect.
Figure 68
Figure 69
WARNING
Potential risk of re, electric shock, and personal
injury. Take precautions to reduce such risks.
CAUTION
Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and
dangerous operation. Verify proper operation after
servicing.
RECEIVER
WHITE
PURPLE
YELLOW
INDICATOR
SWITCH
+-
WHITE
BLACK
L. BRN. THERM (3)
R. BRN. THERM (4)
14 WAY RIBBON TO
CONTROL MODULE
P1
T1
T2
P2
PURPLE
YELLOW
WHITE
BLUE
TRANSFORMER
RED
BLACK