Specifications

30259-0-0212Page 32
GAS CONNECTION INSTALLATION
PUSH IN PLUG
ACCESS PLATE
CAUTION
The gas supply line to the replace must be installed
under conditions which will allow for easy removal
of the replace from its location for servicing of the
replace. For replace insert installation, incorporate
a loop into the exible gas line.
Under no circumstances should the gas supply line
to the replace be installed in a way that would pre-
vent the replace from being serviced or inspected.
GAS SUPPLY LINE TO FIREPLACE
1. Pullthefactoryinstalledexiblegaslinethroughtheholein
thebackpanel.SeeFigures54and55.
2. Connectthegassupplylinetoexiblegashose.Ensurethat
exiblegashoseisnotkinkedafterttinggassupplyline.Any
excessexiblelinecanbepushedbackintothereplace.
3. Place rubber grommet that is supplied in hardware packet
overtheexiblegaslineandsecureintheholeinthebackof
thereplace.
Gas Connection - In-Wall Units - Fireplace Mantis ONLY
1. Removethe accessplate onthe leftside ofthe cabinetby
removing three screws as shown in Figure 56. Put the screws
aside.
2. Pushthefactorysuppliedexiblegaslinethroughtheaccess
holeontheside.
3. Remove the knockout from the access plate and insert the
exiblegaslinethroughthehole.
4. Securetheaccessplatetothecabinetwiththreescrewsre-
movedinStep1.
5. Aplastic pushinplug is suppliedinthe hardware package,
inserttheplugintothe1-3/8inchholeinthebackoftheunit.
6. Inserttherubbergrommetintotheholeintheaccessplateto
protecttheexiblegasline.
Figure 54 - Fireplace Mantis
Figure 55 - Bay Window Mantis
Figure 56
Gas Connection, Fireplace Mantis In-Wall Units
FLEXIBLE GAS
LINE