Owner`s manual
25700-1-0809Page 28
PVCAHORIZONTALCOLINEARDIRECTVENTADAPTOR
COLINEAR ADAPTER
SINGLE FLUE HORIZONTAL
MODEL PVVK-SH
1. Attach colinear adaptor to back of heater with two (2)
screws.
2. When adapter is connected, continue with your vent run.
Cementing PVC joint is recommended, but not required on
colinear fresh air intake adaptor.
Figure36-Colinearadaptor
Colinear adaptor to be used in conjunction with single ue horizontal vent kit PVVK-SH. The two attachments are used for colinear
direct vent installation.
4 13/16”
311/16”
6 1/8”
7 5/16”
Figure 37
Figure 38
Figure 39
8-8 x 1/2” Phillips Truss Head Screw