Owner`s manual

25700-1-0809 Page 23
Available from Empire Comfort Systems, Inc.
INSTALL FOAM GASKET
FLUE ADAPTOR
PLASTIC GASKET
THREADED CONNECTOR
2. Attach ue adaptor to back of heater with four (4) screws.
Note: No PVC cement is needed
to install ue adaptor kit.
3. Install plastic gasket and screw threaded connector to the ue adaptor.
When these connections are made, continue with your vent run. Cement
all PVC joints on vent run.
PVVK-SHHORIZONTALVENTADAPTORKIT
1. Install foam gasket.
Figure 25
Figure26
Figure 27
8-8 x 1/2” Phillips Truss Head Screw