Owner`s manual

27020-3-0410Page 24
Available from Empire Comfort Systems, Inc.
INSTALL FOAM GASKET
FLUE ADAPTOR
PLASTIC GASKET
THREADED CONNECTOR
Attach ue adaptor to back of heater with four (4) screws.
Note: No PVC cement is needed
to install ue adaptor kit.
Install plastic gasket and screw threaded connector to the ue adaptor.
When these connections are made, continue with your vent run.
Cement all PVC joints on vent run.
HORIZONTALVENTADAPTORKIT
8 x 1/2” Phillips Truss Head Screw