Owner`s manual

27020-3-0410Page 16
ROUGH FRAMING DIMENSIONS
A
B
C
ACCESS
PANELS
INSERT INTO MASONRY FIREPLACE
BAY WINDOW
A - 13 /34” MIN. CO-LINEAR
8 1/2” WHEN USING DIRECT VENTING
NOTE: DIMENSIONS FOR USE WITH SHORT TOP.
THIS IS RECOMMENDED FOR UNIT SERVICE-
ABILITY.
B - 25 1/8”
C - 28”
NOTE: IF TRIM AROUND HEATER IS NECESSARY, THE
SURROUND KIT PVE1-1 OR PVE2-1 MUST BE
USED, AND SUBTRACT 1” FROM (A) DIMEN-
SION.
BAY WINDOW
A - 12 3/4” MIN. SHORT TOP
17 13/16” MIN. SLIM TOP
USING SURROUND KIT
B - 25 1/8” MIN. DIRECT VENT
26 1/2” MIN. SINGLE FLUE
29” MAX
C - 28” MIN. NO SURROUND
33” MIN. WITH PVE-1 SURROUND
35” MAX. WITH PVE-1 SURROUND
37” MAX. WITH PVE2-1 SURROUND
Figure 15
Figure 13
FLAT FRONT
A - 23 1/2” WHEN USING FI28(BL,CM,HP,SS) SUR-
ROUND
B - 24 3/4” MIN. DIRECT
29” MAX
C - 28 3/16” MIN. WITH SURROUND
37” MAX. WITH 38” SURROUND
D - 4”
Figure 14
ACCESS
PANELS
1.5”
FLAT FRONT
A - 23 1/2” MIN. WITH 90° STREET ELBOW
B - 24 3/4”
27 3/4” IF FGK SURROUND IS USED
C - 28 3/16” MIN., 31” RECOMMENDED FOR
SERVICEABILITY.
NOTE: HEATER WILL BE 0” CLEARANCE ON RIGHT
AND 3” ON LEFT FOR SERVICEABILITY.
D - 4” - 6”
NOTE: ONLY ONE ACCESS PANEL (FIGURE 14) IS NEED-
ED. INSTALLER TO DETERMINE BEST OPTION.