User Manual

8 Operator’s Manual
BEFORE YOU START
• Remove packing materials and unpack all parts and lay them
on a at, stable surface.
• Make sure the delivery contents are complete and free of any
damage. If you nd that parts are missing or show damage do not
use the tiller/cultivator but contact the Mantis customer service
center at 1-800-366-6268 for assistance. Using an incomplete or
damaged tiller/cultivator represents a hazard to people and property.
• Ensure that you have all the accessories and tools needed for
assembly and operation. This also includes suitable personal
protective equipment.
Assembly
TILLER/CULTIVATOR ASSEMBLY
The tiller/cultivator and the packaging are not
children’s toys! Children must not play with
plastic bags, sheets and small parts! There is
a danger of choking and suffocation!
The tiller/cultivator must be fully assembled before operation! Do not use tiller/cultivator that is only partly
assembled or assembled with damaged parts! Follow the assembly instructions step-by-step and use the
pictures provided as a visual guide to easily assemble the product! Do not connect the tiller/cultivator to
power supply before it is completely assembled! Failure to comply could result in accidental starting and
serious personal injury.
• Attach the cable clips to the middle
handle bar
1
• Secure the middle handle to the lower
handle using the rst set of knobs, bolts,
and plastic washers. Tighten the knobs
on each side to ensure a secure t.
2
• Connect the upper handle to the middle
handle using the second set of knobs, bolts
and plastic washers. Tighten the knobs on
each side to ensure a secure t.
3
NOTE: Take care of small parts that are removed during assembly
or when making adjustments. Keep them secure to avoid loss.