Installation Guide

7
4.3 4.4
4.5 4.6
Insert the back panel assembly on the other side of
the aerator panel, once again mating the posts on
the edge of the panel with the holes in the endcap.
Place the other endcap on top of the drum, aligning
the holes with the posts on the panel edges and
aligning the D-hole Vents at the door opening.
Use the Phillips screwdriver, screws
(4a), and fl atwashers (4b) to fasten
the endcap
Turn over the drum assembly and
fasten the other endcap with the
remaining screws and fl atwashers.
Back Panel Assembly
D-Hole Vents
are Aligned