Installation Guide

5
WHAT YOU’LL NEED
Tools: Phillips screwdriver
Hardware: 3a - Latch
3b - Socket bolts
3c - Screws #10
3d - Lockwashers
Parts: Item 3 - (1) Front panel (with 2 holes at one edge)
STEP 3 – FRONT PANEL ASSEMBLY
3.1
As in step 2, from the inside of the front panel, push the socket
bolts (3b) through the holes in the front panel.
From the outside of the front panel, position
the latch (3a) over the holes and fasten with
the lockwashers (3d) and #10 screws (3c) as
shown. Tip: While tightening the #10 screws,
you may need to use the fl at screwdriver to
prevent the socket bolts from turning.
3.2
Holes in
the panel
Socket Bolts