Installation Guide

2
Back Porch ComposTumbler™
Assembly Instructions
Tools You Will Need
• Hammer
• (2) 7/16” (11mm) and/or
adjustable wrenches
• Flat screwdriver
• Phillips screwdriver
Everything else you will need is included with your
ComposTumbler.
2
1
9
6
12
11
10
13
7
3
4
5
8
Item Part # Description Qty
1 CT03530-00 Endcap 2
2 CT03531-00
Door Panel (4 holes near one edge) 1
3 CT03532-00
Front Panel (2 holes near one edge) 1
4 CT03533-00
Aerator Panel (large center hole) 1
5 CT03534-00 Back Panel (no holes) 1
6 CT01699-00 Aerator Cap 1
7 CT01698-00 Aerator Base 1
8 CT01723-00
Screen (pre-assembled in Endcaps) 2
9 CT03505-00 Axle Rod 1
10 CT03506-00 Wheel 2
11 CT03507-00 Handle 1
12 CT03508-00 Leg 2
13 CT03509-00 Brace 1
Step 1
Item Description Qty
1a 1/4-20 X 3 1/4 Screw, Grade 2 1
1b 1/4-20 Wing Nut (P/No. CT06018-04) 1
Step 2
2a
Door Handle, Back Porch Ct (P/No. CT03527-00) 1
2b Latch Strike (P/No. CT03528-00) 1
2c 10-24X1 Combo Truss Head Socket Bolt 2
2d Screw Machine, 10-24X1/2 Phillips Truss Head 2
2e
Screw #8X5/8 Phillips Pan Head, Type B Sheet Metal 2
2f
#10 Internal Tooth Lock Washer, Steel, Zinc Plated 2
Step 3
3a Latch (P/No. CT01825-00) 1
3b 10-24X1 Combo Truss Head Socket Bolt 2
3c Screw Machine, 10-24X1/2 Phillips Truss Head 2
3d #10 Internal Tooth Lock Washer 2
Step 4
4a
Screw #14X1 Phillips Pan Head, Type A Sheet Metal 12
4b Washer Flat 5/16 Reg Type B 12
Step 6
6a 1/4-20 X 3 1/4 Screw, Grade 2 2
6b
5/16 Push On Cap Nut, Black (P/No. CT01724-03) 2
6c Axle Bushing (P/No. CT03510-00) 2
6d 1/4 USS Flat Washer 2
6e 1/4-20 Center-Lock Nut 2
Parts for the ComposTumbler
Hardware for the ComposTumbler
1a
4a
6a
6b 6c
6d
6e
4b
1b
2a
2b
2c
3a
3b
3c
3d
2d 2e 2f
STEP 1
STEP 4
STEP 6
STEP 2
STEP 3
Hardware bags are
labeled for each step.
Step 5 does not
require any hardware.