Operating instructions

Contact us at www.mantis.uk.com
17
Troubleshooting
Caution! Before performing troubleshooting, switch off the tool and remove the battery.
Problem Possible Cause Possible Solution
Unit does not run Lock off not fully operated Check that lock off (9) is fully
forward prior to moving trigger
Blade cutter is running hot Blade cutter dull Have blade sharpened
Blade cutter has dent Have blade inspected/ overhauled
Too much friction, due to lack of
lubricant
Apply lubricant spray
Blade cutter will not move Machine defective Contact Service Agent
Excessive vibrations/noise Machine defective Contact Service Agent
Hedge trimmer operates
intermittently
Internal wiring of machine damaged Contact Service Agent
On/Off switch defective Contact Service Agent
Ordering Spare Parts
The following information should be provided when
ordering spare parts:
• Type of machine
• Item number of the machine
Repair Service
Repairs to electric power tools should only be carried out
by specialist electrical personel.
UK Mantis UK Limited
Orchard House
Hempshaw Lane
Stockport
Cheshire SK1 4LH
Phone - 4401614741525
Europe Mantis France SARL
20 rue des Garennes
57155 Marly
France
Tél [phone]
Or contact your local Mantis authorised dealer.