Owner`s manual

Electric Tiller

C. Upper Handle Assembly

1. Attach the upper handle assembly (#1) – the handle

with the power cord – to the right lower handle (#10)

and secure with the handle knob (#12), and cap screw

(#16). (Picture 1 and 2)

2. Follow the same steps to install the left upper

handle onto the left lower handle. (Picture 3)

3. Use the clip (#18) to secure the power cord in place

on the lower handle. (Picture 4)

4. Now install the Handle Brace (#14). Line it up with

the holes on the upper handles. Then insert a Bolt

(#13) and a Lock Nut (#17) on either side (Picture 5)

5. Use a wrench to tighten Bolt (#13) and

Lock Nuts (#17).

6. Now use wrench to tighten all nuts and bolts firmly

and securely.

Picture 1

Picture 2

Picture 3

Picture 5

Picture 4

420728 Vesey Mantis Electric Tiller_manual 3/5/10 3:51 PM Page 8