Installation

PAGE 6 MantelMount MM700R Recess Box Kit Addendum

Temporarily fit the Recess Kit into the hole and mark the

locations for the four Lag Bolts onto the centers of the

studs. The Lag Bolts must be installed into the centers.

Pre-drill the 4 holes with 11/64” drill bit to a depth of

2.5 inches (65mm) including wall covering. Note: Wall

covering (drywall) must not exceed 5/8” thickness.

16a 17a

Install the Recess Braces onto the Recess Box {61}

aligning the center mark to the center of the Recess Box.

install Screws {14} from the back and the Lockuts {52}

from the front. Tighten Securely.

The heads of the Screws will protrude slightly in back and

will need to be pressed into the drywall.

15a

Align a Recess Brace {63} to the studs in order to locate

the center line onto the Brace. An equal amount of the

Brace should extend past each of the studs.

The Recess Brace may extend more to the left or right

when the installation is finished.

14a

Optional Longer

Brace Shown

STUD