Installation

PAGE 2 MantelMount MM700R Recess Box Kit Addendum
{14} x4
M8 x 16
{64} x4
{65} x2
{63} x2
{61} x1
{10} x4
M5-M6
IMPORTANT: This requirement replaces
requirement “C” in the MM700 Manual.
Installation with the Recess Box will reduce the maximum size
of the Mantle to 12 inches. MantelMount installed with the
Recess Box can not extend past a mantel larger than 12 inches.
Also note that the Recess Box will reduce the amount of
side-to-side swivel because it does not extend out as far.
12 inches
MAXIMUM
When using the
Recess Box Kit
{52} x4
M8 Locknut
IMPORTANT INFORMATION: The Vertical Braces {31} are a
fixed distance (3 inches) higher than the bottom of the
opening cutout for the Recess Box {61}. This relationship
can be used to calculate unusual mounting situations such
as centering the TV in an alcove or mounting to a specific
height on the wall.
4a
THREE INCHES
Fixed Distance
RB100 Recess Box Kit
If you measure the distance from the
bottom of your TV (or Sound Bar) to the
bottom of the Vertical Braces {31} you
will automatically know the distance
from the bottom of your TV to the
bottom of the opening to cut out.
You can use this information to install
the Recess Box on the wall in order to
locate the height of your TV to any
specific height you desire.
Example: If the Vertical Braces are 6
inches higher than the bottom of your
TV, then you will cut out the opening for
the Recess Box 3 inches higher than
where you want the bottom of your TV
when the installation is complete.
If you are installing above a mantel,
then your installation must still have the
additional clearance for downward
motion stated in the chart in Step 9a.
Before you begin, please verify that all
components are included and undamaged.
If any parts are missing or damaged,
contact MantelMount. Never proceed with
missing or damaged parts!