Installation Guide

PAGE 6 MantelMount MM860
If mantle extends:
10 - 12 inches
12 - 14 inches
14 - 17 inches
Required Clearance:
Less than 10 inches Add 4 inches
Add 5 inches
Add 7 inches
Add 10 inches
17 - 19 inches Add 13 inches
MANTEL
ADD THIS CLEARANCE
FROM THE CHART
MEASURE THIS DISTANCE
(with or without soundbar)
see: Step 8
The result will be the correct
height above the mantel to
install the Housing
USE THIS DISTANCE
for Step 12
SUBTRACT
SIX INCHES
Determine the Vertical Position of the Housing:
This image at right shows that the further out a mantle extends, the more it will
interfere with the arc of the lowering TV. The chart below gives clearance heights
from the bottom of the TV to the top of various mantel sizes.
However, the MM860 Lift Housing {30} is often located even higher on the wall
than the TV. To locate the TV so it has enough clearance and doesn’t hit the
mantel, you will need to know how much higher the Housing is than the bottom of
the TV. Then you can locate the Housing on the wall.
NOTE: If there is extra space available, due to a high ceiling for example, then
these heights are only minimum requirements.
9