User Manual

MantelMount is designed for use only with decorative
fireplaces that are not the primary heat source for a
house. Temperature at the front edge of mantle should
never exceed 110° F.
A B
C
E
D
Mantle must not extend from mounting surface
more than 15 inches. MantelMount can not extend past a
mantel larger than 15 inches. Larger mantels will also
reduce the amount of side-to-side swivel.
The space above the mantle must be taller than the TV. The required space
depends on how far out the mantle extends. Refer to chart below and add this
additional height to the TV height to determine if space is tall enough.
Wall must be WOOD STUD FRAME only. There must be at
least 2 studs available for mounting. Wall covering must
not exceed 5/8 inch thick.
TELEVISION REQUIREMENTS:
1. Weight must be between 25 - 115 pounds.
2. Screen size larger than 44 diagonal inches.
3. Mounting screw holes are VESA compliant.
For non-VESA hole patterns, please visit:
www.mantelmount.com/non-vesa
Please verify that your installation meets all of these CRITICAL requirements:
110°F
MAX.
15 inches
MAXIMUM
2 STUDS
If mantle extends:
Less than 8 inches
8 - 10 inches
10 - 12 inches
12 - 14 inches
This is required space height:
TV height plus 2 inches
TV height plus 4 inches
TV height plus 5 inches
TV height plus 7 inches
TV height
Mantle
Extends:
Space height
PAGE 4 MantelMount MM700
larger than 44”
VESA
Width: 200-800mm
Height: 100-500mm