User Manual

MM540 Installation Instructions 20
5.8
Install the Wall Plate Covers.
For wiring inside the Wall Plates {32}, use a Hole Saw drill bit to cut a hole through a Wall Cover {57}.
Be careful not to damage the edge around the hole. For best results, support the Wall Cover with scrap wood behind the drilling area.
Paint the Wall Covers if desired. Once dry, snap them onto the Wall Plates.
Thank you for purchasing a MantelMount.
For installation assistance, refer to the Troubleshooting Tips or contact Customer Support.
1.800.897.9755 ext.1
[e-mail]
Monday – Friday
7:00am – 4:00pm PST
{57}
{32}