User Manual

Customer Support 1.800.897.9755 x1 [e-mail]
19
Verify the proper Lifting Performance (Force).
MantelMount is designed to keep the TV securely in
the UP position while also allowing it to gently rest in
the DOWN position. Refer to diagram below.
If you need to make adjustments, reinsert the Safety
Bolt and then repeat STEP 5.1.
For more information on rening Lifting Performance,
refer to “Mount Performance” in the Troubleshooting
Tips on page 21.
Make Post-Leveling adjustments, if necessary.
Place a level on top of the TV while it’s in the UP position.
If it’s level, the installation is complete! If not, slightly
loosen all four Leveling Screws {15} and rotate the TV
until it’s level and then tighten all the Screws.
Adjust the Vertical Tilt Position.
Locate the two sliding knobs on each
side of the Tilt Mechanism on the Lifting
Arm {35}. Slightly loosen the knobs and
position the TV to the desired tilt, then
tighten the knobs.
The tilt will remain at the same angle
while the mount is raised or lowered,
unless it is manually changed.
5.5
5.6
5.7
{15} x4
Strongest in the UP/TOP position
Neutral in
the MID
positions
Weakest in the
DOWN/BOTTOM
position
{35}
Customer Support 1.800.897.9755 x1 [e-mail]