Owners manual

Determine the desired swivel setting: Installing the Side Swivel Kit:

MantelMount MM540 is designed to swivel 35° left and

35° right. Most TVs will reach the wall within this amount

of swivel.

For situations where more swivel to one side is desired,

MantelMount includes a Side Swivel Kit that will provide

60° of swivel in either the left or right direction, but not

both. This situation is only for a small TV and a mounting

situation that does not have a mantel.

Note that the “Auto-Straightening” feature does not work

with the Swivel Extenders; The TV will need to be

manually flattened when raising it to the UP position.

If you do not need to add the Side Swivel Kit, skip

ahead to Step 20.

Remove the Swivel TV Plate (Item 34 in the Parts List).

Save all of the hardware, it will be re-installed in the

same order it is removed.

Install both Side Swivel Plates {56} onto the Lift

Mechanism. The plates nestle underneath the existing

tabs. The Screws {36} are installed in the center hole of

each Side Swivel Plate.

Re-attach the Swivel TV Plate onto the desired side of the

Side Swivel Plates in the same order that each part came

off.

{56}

{11}

{25}

{36}

35˚

60˚

TV Frame

shown for

reference only

PAGE 8 MantelMount MM540