Owners manual

5
The Vertical Braces {31} are always mounted higher than
the bottom of the TV.
The Brace Extenders {30} will be mounted so that the
handles are slightly below the TV.
Attach the Vertical Braces {31} to the TV so the bottoms of
the Vertical Braces are at least a few inches higher than the
bottom of the TV. Centered on the TV is ideal.
Installing the Vertical Braces higher on the TV will allow more
downward travel because it allows more clearance between
the Lifting Mechanism {35} and the mantel.
6
7
Attach the Extenders with Screws {18} and Nuts {23},
making sure the handles are within one inch from the
bottom of the TV.
Measure the distance from the bottom of the Vertical
Braces {31} (not the Extenders) to the bottom of
television (not the handles).
Write down this distance to use in Step 9.
8
Use this distance in Step 9
Extenders are
installed so that
the handles are
1” below the TV.
Vertical Braces:
Always higher
than the bottom
of the TV
3 to 10
INCHES
Bottom of
Vertical Brace
Bottom of TV
1 inch MAX (25mm)
{23}
{18}
PAGE 6 MantelMount MM340