Datasheet

All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa.
* SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE *
4141
Description
This high current switching mode DC regulated output power
supply is designed with a high efficient active power factor
corrector. The constant current limiting protection allows the
outpu current to remain stable but the output voltage decreases to
a level that permits safe operatio of the power supply.
The remote sensing terminals are used to compensate for
output line losses so that a precise regulation can be achieved for
critical voltage application away from the power supply.
The output voltage level and ON-OFF can be externally
controlled via the remote terminal.
It is ideal for applications that need good quality high DC
current network with precise point of voltage regulation.
SPS-9600 / SPS-9602 has a small footprint for its 900W
continuous maximum power.
It is suitable for a wide range of applications such as street
blaster super high power car audio demonstration console, radio
equipment and etc.
ly
t
n
High Current with Remote Sinsing & Control
Switching Mode DC Regulated Power Supply
SPS - 9600 / 9602
Features
• Total max. continuous output current 60A (SPS-9600) / 30A
(SPS-9602)
• Main Output /Remote Sensing/ Remote Control/ terminals at
the back
• Front terminals 5A (SPS-9600) / 3A (SPS-9602) limiting.
• ( Precise Load Point Voltage )
• Remote Sensing for remote point of regulation.
• Remote control terminals for output voltage adjustment and
*on/off*
• 29HR Count Down Timer (Optional) for Output ON/OFF
• Floating Ground Design
• Overload / Over-temperature / Short Circuit Protections
• Constant Current mode with LED indicator prevents
overloading
• Variable speed thermally controlled fan
• High RFI stability
• Active power factor correction ( P.F. >0.97 )
• Housing are available in Pantone warm grey 1C or Pantone
433C dark grey
• *Remote output on/off is an added function for production
after Oct. 2004*
Specifications
SPS - 9600 SPS - 9602
Variable Output Voltage 1 - 15Vdc 1 - 30Vdc
Total Rated Output Current
(Main Output + Front Output) 60A 30A
Rated Output Current (Main Output) 60A 30A
Rated Output Current (Front Output) 5A 3A
Load Regulation (Main Output) 0.1% +5mV
Line Regulation (Main Output) 0.05% +3mV
Ripple & Noise (Peak-Peak) 50mVp-p
Input Voltage 230Vac , 50Hz~ ( or on request )
Efficiency >85%
Meter Type LED Meter
Voltmeter Range 3 digit display
Ammeter Range 3 digit display
Meter's Accuracy ±1% +1 count
Protection Devices Overload (Constant Current Limiting), Over Temperature, Short Circuit,
OVP protections
Cooling System Variable speed thermally controlled fan
Special Feature Remote sensing , Remote output voltage control and *on/off *
* Remote output on/off only for production after Oct. 2004 *
Approvals CE EMC : EN 55022 , LVD : EN 60950
Dimensions (WxHxD) 220 x 110 x 360 mm ( 8.7 x 4.3 x 14 in. )
Weight 5.8kgs ( 12.8lbs )
Remarks Power factor correction >0.95 at optimal load