User Manual

F. Command Set
Command line format
COMMAND<parameter1><parameter2>... [CR]
Remark:
One decimal place for current value: HCS-3100, 3150, 3200, 3202
Two decimal places for current value: HCS-3102, 3104, 3204
Command code & return value
Function
Example
Input Command:
GMAX[CR]
Return value:
<voltage><current>[CR]
OK[CR]
Get PS maximum Voltage & Current value
<voltage>=???
<current>=???
Input command:
GMAX[CR]
Return value:
180200[CR]
OK[CR]
Meaning:
Maximum Voltage is 18.0V
Maximum Current is 20.0A
Input Command:
VOLT<voltage>[CR]
Return value:
OK[CR]
Preset Voltage value
<voltage>=000<???<Max-Volt
*Max-Volt value refer to product specification
Input command:
VOLT127[CR]
Return value:
OK[CR]
Meaning:
Set Voltage value as 12.7V
Input Command:
CURR<current>[CR]
Return value:
OK[CR]
Preset Current value
<current>=000<???<Max-Curr
*Max-Curr value refer to product specification
Input command:
CURR120[CR]
Return value:
OK[CR]
Meaning:
Set Current value as 12.0A
Input Command:
GETS[CR]
Return value:
<voltage><current>[CR]
OK[CR]
Get PS preset Voltage & Current value
<voltage>=???
<current>=???
Input command:
GETS[CR]
Return value:
150180[CR]
OK[CR]
Meaning:
The Voltage value set at 15V
and Current value set at 18A
Input Command:
GETD[CR]
Return value:
<voltage><current><status>[CR]
OK[CR]
Get PS Display values of Voltage, Current and
Status of CC/CV
<voltage>=????
<current>=????
<status>=0/1 (0=CV, 1=CC)
Input command:
GETD[CR]
Return value:
150016001[CR]
OK[CR]
Meaning:
The PS Display value is 15V and 16A.
It is in CC mode.
Input Command:
GOVP[CR]
Return value:
<voltage>[CR]
OK[CR]
Get preset upper limit of output Voltage
<voltage>=???
Input command:
GOVP[CR]
Return value:
111[CR]
OK[CR]
Meaning:
The preset upper limit of output Voltage is
11.1V
Input Command:
SOVP<voltage>[CR]
Return value:
OK[CR]
Preset upper limit of output Voltage
<voltage>=000<???<Max-Volt
*Max-Volt value refer to product specification
Input command:
SOVP151[CR]
Return value:
OK[CR]
Meaning:
Preset upper limit of output Voltage as 15.1V