Datasheet

BENCH TOP
www.manson.com.hk P.8
Remote Programmable HCS-Series
Remote Programable Laboratory Grade Switching Mode Power Supply
◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa.
◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Special Features
Preset Cycle Programming
3 User defined V & I preset, Remote control V, I and output on-off
Max. 20 presets of V & I,
Max. preset time 100 minutes (99min + 60sec),
Max. preset cycle 999
Weight
Dimensions (WxHxD)
Approvals
2.4 kg 5.2 lbs
200x80x208 mm 7.8x3.2x8.2 inch
CE EMC: EN 55011, 55022 LVD: EN 60950, 61010
Protections
Cooling Method
Power Factor Control
Efficiency (230VAC)
Full Load Input Current (230VAC/100VAC)
Input Voltage
Current Meter
Voltage Meter
Switching Frequency
Ripple & Noise (peak-peak) Voltage
Ripple & Noise (r.m.s.) Voltage
Line (90 - 264VAC Variation)
Line (90 - 264VAC Variation)
Variable Output Current
Load (10 - 90% Rated Voltage)
Load (10 - 100% Rated Current)
Variable Output Voltage
Meter Type & Accuracy
Tracking Over Voltage Protections
Ripple & Noise
Current Regulation
Voltage Regulation
Output
Models
Overload, Short Circuit by Constant Current, Output Tracking Over Voltage,
Over Temperature
Thermostatic Control Fan from Zero to full speed
Power factor correction >0.95 at optimal load
85%
2.1/4.6A
90 - 264VAC 50/60Hz~
3 Digit LED Display ±0.2% +3counts
3 Digit LED Display ±0.2% +3counts
100 - 120Khz~
50mV
O/P 1-5V : set voltage +2V
O/P 5-18V : set voltage +3V
5mV
50mA
20mV
0 - 20A
100mA
50mV
1 - 18VDC
0 - 10A
1 - 36VDC
0 - 5A
1 - 60VDC
HCS - 3200 HCS - 3202 HCS - 3204
50mV
5mV
50mV
5mV
86% 86%
100mA 100mA
100 - 120Khz~ 100 - 120Khz~
O/P 1-5V : set voltage +2V
O/P 5-20V : set voltage +3V
O/P 20-36V : set voltage +4V
O/P 1-5V : set voltage +2V
O/P 5-20V : set voltage +3V
O/P 20-60V : set voltage +4V
2.1/4.6A 1.7/3.8A
Specifications
Following up on the success of our HCS series high power
supplies, we come up with this new range of low power supplies
based on the feedbacks from end users.
We add an USB port for access to computer to run cyclical
operation with programmable voltage, current, period time
and cycles.
The on-housing presets, separate remote control, rotary
encoder dual action control for easy tuning of voltage and
current, and all the features of the original HCS are kept. In
addition it is of universal AC input voltage .
It is probably the most cost effective Remote Programmable
Power supply with such advanced features and protections. It
is ideal for laboratory, university, work shop, production,
quality control and sophisticated DIY applications.
•
•
•
•
•
•
•
•
•
•
•
Remote Programmable via USB to computer .
20 programmable sets of V, I & cycle periods for repetitive
operation up to 999 cycles .
3 user defined V & I panel presets for frequent use
Wired Remote Control of V, I, & output On-Off without
computer.
Rotary encoder knob with definitive action of fine and
coarse tuning
Smart cooling fan speed control from zero to full speed
Self diagnostic check on LED display and cooling fan on
start up
Isolated ground , Active PFC & high power efficiency
Universal AC input
Over load , Tracking Over Voltage Protections
Constant Current limit setting with output open circuit
Description
Features