Datasheet

BENCH TOP
Single Output DC Regulated Power Supply
(Linear mode)
The EP-603/613 series are designed for
general electronic servicing, school electronics,
laboratory and hobbyist. All units may be used
as either a constant voltage supply with current
limiting or as constant current source with
voltage limiting. Three independent outputs, two
are fixed voltage, and one adjustable voltage.
◘
◘
◘
◘
◘
◘
◘
One 0 - 30V adjustable output
One 5V 500mA snap-on output
One 12V 500mA snap-on output
Current limiting with Indicator
Adjustable current control
Overload and short circuit protection
Galvanized steel case
Description Features
◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa.
◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Specifications
Output Voltage
Rated Output Current
Fixed Output Voltage 1
Fixed Output Voltage 2
Ripple & Noise (r.m.s.)
Load Regulation (0-100% load)
Line Regulation (±5% variation)
Input Voltage
Meter Type
Volt. Meter Range
Curr. Meter Range
Meter's Accuracy
Output Terminals
Cooling System
Protection Devices
Approvals
Dimensions (WxHxD)
Weight
Accessories
Models
EP-603
Analog Meter
0 - 35V
0 - 3A
7% fsd
One variable main output screw-on type,
two snap on fixed voltage 1 and 2
0 - 30VDC
2.5A
5VDC 0.5A Continuous / 1A Maximum
12VDC 0.5A Continuous / 1A Maximum
<0.05% +10mv
<5mv
<0.05% +10mv
230VAC 50Hz~ (120VAC 60Hz~ or on request)
Natural Convection
Overload, Short Circuit
CE EN 60065, EN 55014
150x145x200mm 5.9x5.7x7.9inch
2.8kgs 6.2lbs
User Manual
EP-613
LCD Meter
3 digit LCD Display
3 digit LCD Display
1% +2 counts
EP-603
EP-613
4www.manson.com.hk
EP-Series