Technical Specifications
Form No. M6126 Printed in U.S.A. 4/07
© 2007 Mansfield Plumbing Products, LLC
® Pro-fit is a registered trademark
of Mansfield Plumbing Products, LLC.
Note: Due to integral tile flange,
a nailing flange is not available on this unit.
Note: Measurements may vary 1/4" (6.4 mm +_)
Dimensions 42" x 60" x 21-1/4"
Material Acrylic, fiberglass reinforced
Construction Self-contained, pre-plumbed whirlpool bath
Pump Motor 1-1/4 HP, 1 phase, 120 volt, 60 HZ, 5.9 AMP,
Electrical Requirements 120 volt, 20 AMP, GFCI
Number of Jets Six
Air Volume Control Tw o
Water Capacity 55 gal. max., 42 gal. min.
(209 liters/160 liters)
Floor Loading 47 lbs./sq. ft. (229 kg/m
2
)
Shipping Weight 168 lbs. (76 kg)
Warranty Limited One Year
Opening Dimensions
60"
(1524 mm)
55"
(1317 mm)
29"
(737 mm)
30"
(762 mm)
40"
(1016 mm)
8-1/2"
(216 mm)
42"
(1067 mm)
Air Control
Air Switch
Suction Drain
Jets
20-1/4"
(514 mm)
54-1/4"
(1378 mm)
53"
(1346 mm)
11"
(279 mm)
21-1/4"
(450 mm)
42"
(1067 mm)
16-1/2"
(419 mm)
Center Overflow
Slope
1/4”
/Foot
(6 mm)/Foot
STD
ALT1
SPECIFICATIONS
TECHNICAL INFORMATION
4260 TFS CD
Rectangular Whirlpool or Bath
UPGRADES
These dimensions are nominal and are subject to change without notice.
When tested for compliance to the requirement of ANSI A112.19.7M and A112.19.8M for “Whirlpool
Bath Appliances” and ANSI Z124 for “Plastic Bathtub Units” the tested units are found to comply and
are acceptable for listing under the Terralab Engineers, Inc. follow-up service. Listed Number 15197.
Certified for permanent electrical supply connection only.
Factory Installed In-line Heater
• A reliable, heating control upgrade maintains
water temperature at desired level and
operates when flow of water is detected in
the system. Features a standard plug for
easy electrical connection (GFCI: 120V, 20 amp dedicated circuit
required to power this heater).
Trim Upgrade
• This option allows an upgrade to Chrome or Everbrass (PVD) trim
including jets, intake, control and air control(s).
Lift & Turn Drain Kit
Chrome and Everbrass (PVD)
• The lift and turn drain kit provides simple and easy
draining of the bathtub.
Unit is standard with removable access panels. Pump locations shown for clarity.
STD is standard pump location. ALT1 is optional. Specify when ordering.
Removable Access Panel - 5 ft. Model
•
This panel makes it a simple step to access the
pump and other areas as required. Access panels
available on TFS right and left hand models.
With integral apron
PROFIT Specs 4/9/07 1:22 PM Page 20


