Technical Specifications

Form No. M5053 Printed in U.S.A. 2/07
© 2007 Mansfield Plumbing Products, LLC
® Swirl-way is a registered trademark
of Mansfield Plumbing Products, LLC
.
Dimensions 32" x 59-1/2" x 21-1/2"
Material Acrylic, fiberglass reinforced
Construction Self-contained, pre-plumbed whirlpool bath
with heat-bent rigid PVC pipe, mounted on a
pre-leveled thermoformed, drip pan base
Pump Motor 2 HP, Ten speed, 120 volt, 60 HZ,
13.5 AMP
Electrical Requirements Lux.-Sen.: Two separate 120 volt, 20 AMP, GFCI
protected circuits
Basic: One separate, 120 volt, 20 AMP, GFCI outlet
Number of Jets Twelve
Air Volume Control Tw o
Water Capacity 52 gal. max., 42 gal. min.
(201 liters/159 liters)
Floor Loading 47 lbs./sq. ft. (229 kg/m
2
)
Shipping Weight 130 lbs. (59 kg)
Warranty Limited Ten Year
Air Controls
18"
(457 mm)
23-1/2"
(597 mm)
32"
(813 mm)
59-1/2"
(1511 mm)
53-1/2"
(1359 mm)
42"
(1067 mm)
16"
(406 mm)
8"
(203 mm)
Suction
Drain
Mood
Light
Slope
1/4
"/Foot
Jets
STD
59-1/2"
(1511 mm)
58-1/2"
(1486 mm)
18-3/4"
(476 mm)
21-1/2"
(546 mm)
19-1/2"
(495 mm)
Overflow
Centerline
32"
(813 mm)
19-1/2"
(495 mm)
21-1/2"
(546 mm)
Luxury Package
• SensaSelect™ 5 button control
• 2 HP 10-speed pump
• Remote control
• Exclusive custom grab bars
• Pillow
• Infusion™ 2 Chromatherapy system
• In-Line heater
• Metal trim upgrade
Basic Package
• SimpleTouch™ 3 button control
• 2 HP single speed pump
• Exclusive custom grab bars
• Pillow
• Color-Match trim
SPECIFICATIONS
TECHNICAL INFORMATION
CAMDEN
Rectangular Whirlpool or Bath
FEATURES & UPGRADES
These dimensions are nominal and are subject to change without notice.
When tested for compliance to the requirement of ANSI A112.19.7M and A112.19.8M for “Whirlpool
Bath Appliances” and ANSI Z124 for “Plastic Bathtub Units” the tested units are found to comply and
are acceptable for listing under the Terralab Engineers, Inc. follow-up service. Listed Number 15197.
Certified for permanent electrical supply connection only.
No apron available on this model
STD-standard pump location is as shown.
Note: Install this product according to the installation guide.
Fixture dimensions are nominal and conform to
tolerances in ASME Standard A112.19.2
Basic Options
• Infusion™ 2 Chromatherapy system
• 1500 watt in-line water heater
• Metal trim upgrade
• Cable drain in CM, CH, EB & BN
• Nailing flange kit
• Factory installed nailing flange
• Removable 5 foot apron
M5053 Camden.qxd 6/19/07 7:41 AM Page 2