Technical Specifications

Rough-in measurements my vary 1/4" (+/-)
6-1/4"
(159 mm)
PLUMBING ROUGH-IN
39"
(991 mm)
41-1/2"
(1080 mm)
60"
(1524 mm)
35"
(889 mm)
53"
(1346 mm)
11-1/4" (286 mm)
24"
(610 mm)
24-3/4"
(629 mm)
57"
(1448 mm)
INSTALLER NOTE: DUE TO THE FREEFORM SHAPE
OF THIS TUB IT IS RECOMMENDED THAT THE TUB
BE ON THE JOBSITE BEFORE MAKING THE FINAL
CUT OUT FOR DROP IN INSTALLATION.
19-1/4"
(489 mm)
41-1/2
"
(1080 mm)
21"
(533 mm)
21"
(533 mm)
SUCTION
DRAIN
JETS
LIGHT
SLOPE
1/4"/FT.
STD.
ALT.
CENTERLINE OF
OVERFLOW
Form No. M5031 Printed in U.S.A. 9/07
© 2007 Mansfield Plumbing Products, LLC
Dimensions 60" x 41-1/2" x 24-3/4"
Material Acrylic, fiberglass reinforced
Construction Self-contained, pre-plumbed whirlpool bath
with heat-bent rigid PVC pipe, mounted on a
pre-leveled thermoformed base
Pump Motor 2 HP, variable speed, 120 volt, 60 HZ, 13.5 AMP
Electrical Requirements Luxury & Sensory: Two separate 120 volt,
20 AMP, GFCI protected circuits
Basic: One separate, 120 volt, 20 AMP, GFCI outlet
Number of Jets Sixteen
Air Volume Control Two
Water Capacity 70 gal. max., 60 gal. min.
(265 liters/227 liters)
Floor Loading 47 lbs./sq. ft. (229 kg/m
2
)
Shipping Weight (whirlpool) 170 lbs. (77 kg)
Shipping Weight (bathtub) 145 lbs. (66 kg)
Warranty Limited Ten Year
Specifications
Essence
60" x 42" x 24" Oval Whirlpool and Bath
These dimensions are nominal and are subject to change without notice.
When tested for compliance to the requirement of ANSI A112.19.7M and A112.19.8M for “Whirlpool
Bath Appliances” and ANSI Z124 for “Plastic Bathtub Units” the tested units are found to comply and
are acceptable for listing under the Terralab Engineers, Inc. follow-up service. Listed Number 15197.
Certified for permanent electrical supply connection only.
Technical Information
Features & Upgrades
Mansfield Plumbing Products LLC • Customer Service Toll Free 877-850-3060 • Fax [phone]
Website: www.mansfieldplumbing.com • Email: [e-mail]
No apron available on this model.
Pump locations are shown for clarity.
STD - Standard pump location.
ALT - Alternate pump location.
Note: Install this product according to the installation guide.
Fixture dimensions are nominal and conform to tolerances in
ASME Standard A112.19.2
Luxury Package
• SensaSelect™ 5 button control
• 2 HP Variable speed pump
• Remote control
• Pillow
• Infusion™2 Chromatherapy system
• In-line heater
• Metal trim upgrades
Basic Package
• SimpleTouch™ 3 button control
• 2 HP Single speed pump
• Pillow
• Color-Match trim
Sensory Package
• SensaSelect™ 5 button control
• 2 HP Variable speed pump
• PowerPillow™ neck jet pillow
• Remote control
• Pillow
• Infusion™2 Chromatherapy system
• In-line heater
• Metal trim upgrades
Essence M5031.qxd 10/1/07 11:28 AM Page 2