Specification Sheet

Technical Informaon
Specicaons
Model # Descripon Codes/Standards
2018C 21" x 18-1/4" Wall-Mount, Vitreous China Lavatory
Printed in U.S.A. 2/17
© 2017 Mansfield Plumbing Products, LLC
Mansfield Plumbing Products LLC • Customer Service Toll Free 877-850-3060 • Fax [phone]
Website: www.mansfieldplumbing.com • Email: [e-mail]
These dimensions are nominal and subject to change
without notice.
Fixture performance and specifications meet or exceed ASME
A112.19.2-2008/CSA B45.1-08 standards, and other state and
local codes.
See our complete line of acrylic and vitreous china bathroom
fixtures, plastic tank trim and plumbing products.
All Mansfield® wall-mount lavatories are
supplied with this exclusive one-piece steel
hanger. Easily installed and adjusted, it contains
7 holes for solid mounting against wall. Anchoring screw must
be used for correct installation. Standard plumbing practice
recommends use of both mounting bracket and anchoring screws.
NOTE: For secure installation, wall-mounting hanger should be
fastened to solid support wall stud.
30-1/2"
(775 mm)
C
L
of Wall
Stringer
31-3/4"
(806 mm)
C
L
of
Bracket
Mounting Bracket
2-1/4"
(57 mm)
18-1/4"
(464 mm)
12-5/8"
(321 mm)
1-3/4"
(44 mm)
17"
(432 mm)
21"
(533 mm)
Wall Stud
1/2"
(13 mm)
34"
(864 mm)
7"
(178 mm)
16"
(406 mm)
anchor holes
9-1/4"
(235 mm)
Finished Wall
20-1/2"
(521 mm)
Finished
Floor
4"
(102 mm)
8"
(203 mm)
8"
(203 mm)
4"
(102 mm)
Specicaon Descripon Specicaon Descripon
Material Vitreous China
Faucet Holes Single hole, 4" or 8"
Warranty Vitreous China - Limited Lifeme Shipping Weight
Model 2018C - 38 lbs. (17 kg)
2018C
Cape Charles
Wall-Mount, Vitreous China Lavatory