Installation Guide

6
Installation (continued)
2 Hanging the lamp
□ Raise the backplate (A) to wall, insert the
mounting bracket (EE) into the slot in the
backplate (A), and then secure the backplate (A)
to the wall with the small screw (DD).
4 Installing the bulb
□ Prior to installing the bulb, inspect socket
for silica packet. If packet is present, then
remove and throw away. Do not expose it to
children or pets.
□ Install a 120V, 60HZ, 60-watt max.
medium-base type A bulb (H) (not included)
in the socket of the lamp.
□ Adjust the height of the fixture as desired
by loosening the knob (D), once the desired
height is achieved, tighten the knob (D).
(Important note: Before adjust the height, be
sure the glass shade (F) is cool, and the lamp
is unplugged).
□ Plug cord into an outlet and turn on at the
switch (B).
Please contact 904-642-4340 for further assistance.
3 Assembling the glass shade
□ Place the glass shade (F) over the socket
and secure with the socket ring (G).