Installation Guide

Assembly
1 Assembling the lamp
□ Carefully unpack the fixture and lay out all
parts on clean surface.
□ Remove the socket ring (G) from socket (E)
by unscrewing the socket ring (G).
5
Please contact 904-642-4340 for further assistance.
Installation
1 Installing the mounting plate
□ Position the backplate on the wall at desired
location and mark the place for the wood
screws (CC) to be installed.
□ Drill pilot holes on the marked spots and
insert plastic anchors (AA). (If fastening with
wood screws (CC) to stud, skip this step)
□ Attach the mounting plate (BB) to the
anchors (AA) or the spots that you marked on
stud and secure with two wood screws.
(Important note: Make sure the mounting
bracket (EE) is facing up and down as shown).
CAUTION: Ensure the power is off at the
main fuse box prior to beginning installation.