Instructions / Assembly

Care and Cleaning
□ Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Possible Cause
□ The bulb is burned out.
□ The power is off.
□ There is a faulty wire connection.
□ The circuit breaker is off.
□ There is an exposed wire.
□ There are too many items on
one circuit.
□ Discontinue use of the light
fixture.
□ Contact a qualified electrician or
call the Customer Service Team at
904-642-4340.
□ Unplug other items on the circuit.
□ Ensure that the circuit breaker
is set in the on position.
□ Check the wiring.
□ Ensure that the power supply
is turned on.
□ Replace the light bulb.
Solution
The bulb will not light.
The fuse blows or a
circuit breaker trips when
the light is turned on.
Problem
7
Installation instructions (continued)
5. Assembling the bulb
□ Prior to installing the bulb, please inspect socket for silica packet, if packet is present, remove and throw
away, do not expose to children and pets.
□ Install one 120V, 60Hz, 60-watt max. medium-base type A bulb (not included) into socket of the light
fixture.
Bulb
(not included)
Socket