Instructions / Assembly

Installation instructions (continued)
3. Hanging the fixture body
□ Raise fixture body (C) to the wall and carefully tuck the wires inside the outlet box. Spread the electrical
splices so that the black wires are on one side of the outlet box and the white wires are on the other side.
Line up screws with holes in backplate and secure with two finials (DD).
(Important note: This sconce can be mounted up or down, make sure mount the fixture body (C) to wall as
you desired).
4. Assembling the glass shade
□ Remove the socket ring (A) from the socket by unscrewing the socket ring (A).
□ Place glass shade (B) over the socket and secure with the socket ring (A).
6
DD
C
Backplate
A
B
Socket