Instructions / Assembly

1. Removing the mounting plate
Installation instructions
□ Remove the mounting plate assembly (BB) from
the lantern body (A) by unscrewing the two
small screw (DD).
3. Connecting the wires
□ Install the fixture bare copper wire (1) under the
ground screw (EE) on the mounting plate (BB).
□ Connect the fixture bare copper wire (1) to the
green (or bare, or green & yellow) supply ground
wire (2) in the outlet box using a wire nut (AA).
□ Connect the white fixture wire (3) to the white (or
ribbed) supply wire (4) in the outlet box using a
wire nut (AA).
□ Connect the black fixture wire (5) to the black (or
red, or blue) supply wire (6) in the outlet box using
a wire nut (AA).
House wire
black
(or red, or blue)
(HOT)
Fixture wire
black
(HOT)
House wire
white
(NEUTRAL)
Fixture wire
white
(NEUTRAL)
House wire
green
(or bare wire,
or green & yellow)
(GROUND)
Fixture wire
bare wire
(GROUND)
5
3
2
EE
1
6
1
5
AA
4
CAUTION: Ensure the power is off at the main
fuse box prior to beginning installation.
2. Installing the mounting plate
□ Turn off the switch at the wall.
□ Turn the power off at the main fuse box.
□ Attach the mounting plate (BB) to the outlet box
using the outlet box screws (CC).
(Important note: make sure one of the mounting
hole in the mounting plate is facing right.)
DD