TUCSON OUTDOOR FLOOR FOUNTAIN Care and Instruction Manual FPO
51030SNDST ASSEMBLY INSTRUCTIONS Thank you for purchasing a Kenroy Home water feature, you are now only minutes away from filling your home or outdoor living space with peaceful displ ays. Our guarantee backs all of our water features, please do not hesitate to contact our Customer Support Team for resolutions to any parts or installation concerns. CUSTOMER SUPPORT TEAM For any additional questions or concerns please contact our Customer Support Team: 904-642-4340 @KenroyHome customerorders@kenroyhome.
51030SNDST ASSEMBLY INSTRUCTIONS Please reference the separate parts list and ensure that all pieces are included in the package prior to assembly. More than one person may be required to complete the assembly of this product. To protect the finish, place all parts on a soft surface when unpacking. When assembling ensure that all parts are firmly tightened. Choose a location: This freestanding water feature is attractive from all sides and can be used to highlight almost any area.
51030SNDST ASSEMBLY INSTRUCTIONS Place lower reservoir (B) onto base (A) and rotate it clockwise to secure. B A Feed light power cord (L) then pump power cord (J) through plastic tube. Cord should exit through notch in base (A). Place lights (L) into light holders.
1030SNDST ASSEMBLY INSTRUCTIONS Place lower column (C) into lower reservoir (B) and twist it clockwise to secure. Place middle reservoir (D) onto lower column (C) and rotate it clockwise to secure. D C B C Feed rubber hose through plastic tube. Place upper column (G) into upper reservoir (F) and twist it clockwise to secure. Place upper reservoir (F) onto middle column (E) and rotate it clockwise to secure.
51030SNDST ASSEMBLY INSTRUCTIONS Place top assembly into middle reservoir (D) and twist it clockwise to secure. Attach pump (J) to the rubber hose. Top assembly D Rubber hose J FINAL STEPS Place pump access door (H) to cover entry of lower column (C). Fill reservoirs (B, D, F) with 6 gallons of distilled water. Water level should door when fountain is running. 7 Connect the light connectors (K) and (L) and screw the cap tightly.
51030SNDST ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING To clean the pump Unplug the pump from the electrical outlet. Use a small soft brush or place it under a water stream to remove debris. To keep water clean Periodically change water to prevent algae buildup.
51030SNDST ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING cont. If abnormal noise is heard during operation (with water): • Disconnect the power supply and then remove the pump front cover and impeller cover. • Use hand to grip the impeller, gently pull the impeller/rotor assembly out of the pump housing. • Rinse the impeller/rotor assembly and the cavity with clean water. If breakage or surface damage is found in the assembly contact Customer Service for a part replacement.
51030SNDST ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS What should I consider when selecting a water feature? In addition to your personal style tastes, be sure you have an area for your water feature that can be safely exposed to water, as splashing can occur. Also take into consideration what a water feature can add to your environment: the sound of flowing water or decorative lights.
51030SNDST ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED The water is not flowing evenly over my water feature’s surface. How do I correct this? Oil and dirt from your hands or the environment my interrupt proper water flow. Use the water guiding pad (if included with your model) or a mildly abrasive scrub pad and mild soap to clean the surface of the water feature.
51030SNDST ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED My pump is making a loud noise. How do I fix that? 1. Be sure the pump is fully submerged in water. If it is not, and pulling in air, it will make unwanted noise. 2. Check to make sure the pump is not touching the water feature anywhere other than the bottom. If it is up against the side wall or another part, the vibration from the pump can cause unwanted noise.
www.kenroyhome.
