Manual

8
ENGLISH
CAUTION:
When disassembling, never rotate the bolt sleeve in counterclock-
wise direction. Otherwise, the bolt could not be reinserted into
the receiver.
Reassembling the bolt:
Grip the bolt with your left hand. Insert firing pin assembly into
bolt with the cocking piece aligned directly opposite to the bolt
handle. Using your right hand, slide the bolt sleeve on the cocking
piece until it stops, simultaneously pressing the catch lever with
your thumb. Rotate the bolt sleeve counterclockwise until it locks
into position.
Make sure not to turn the bolt sleeve beyond the line of alignment
between its cover part and the bolt handle.
Any further disassembly is reserved to for the gunsmith, who will
have the requisite special tools and devices at his disposal.